开启左侧

LMI固件损坏恢复方案

[复制链接]
Criss 发表于 2018-11-13 14:48:33 | 显示全部楼层 |阅读模式
Use the following steps to recover from bad firmware:
  • Power off the device
  • Make sure the device is directly connected to the PC – don't use a switch
  • Configure the PC as to use IP-address: 192.168.1.1 and netmask: 255.255.0.0
  • Start the kRescue application bin\win32\kRescue.exe
  • Power on the device
  • Close the kRescue application
  • Open a browser and point it to http://192.168.1.10
  • Apply an upgrade package that is known to work


啥意思呢?
就是关机后确保直接通过网线连接LMI设备,然后配置PC端的IP为192.168.1.1 子网掩码为255.255.0.0,然后启动位于bin\win32\kRescue.exe下面的kRescue应用程序,然后再次打开设备,关闭kRescue,打开浏览器输入地址http://192.168.1.10,然后上传一个可以正常工作的更新包即可!

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表